E-cigarette microphone head comparison: electret VS silicon wheat
2024-05-31
Just like the atomization core has ceramic core and cotton core, there are also fine types of E-Cigarette microphones, mainly two types: electret and silicon wheat, among which electret microphones are the mainstream application in the past period of time, while silicon wheat is regarded as the future trend.
Here's a look at the comparison of the two e-cigarette capacitive microphones. Generally speaking, the microphone contains two parts: sensor and ASIC chip. This paper mainly discusses the difference of sensor part.
1. Basic principle of microphone induction -- parallel plate capacitor
First of all, the response of the electret mic head and silicon wheat is to form a parallel plate capacitor through the diaphragm and the back plate. The air flow pressure difference causes the diaphragm to be deformed, and then the capacitance changes. After the identification and processing of ASIC chip, the electrical signal is output, and the e-vapor start and stop is finally achieved.
The key is capacitance change.
In circuit science, the capacity of a capacitor to store charge given a voltage is called capacitance, which is labeled C. The parallel plate capacitor is a simple capacitor, which is composed of two parallel sheet conductors separated by space or dielectric.
According to the relevant formula of parallel plate capacitor, it is:
● Normal e-cig mic head: guide plate area A is fixed, medium permitivity ε is air by default, air flow makes the diaphragm deformation -- the distance between the diaphragm and the plate d changes -- causing capacitance changes;
● Leaking e-cigarette microphone head: the area of the guide plate A is fixed, and the plate and the diaphragm are not air, but e-liquid. Then, the dielectric permitivity ε changes -- causing capacitance changes -- since starting.
2. Electret microphone VS silicon wheat: there are differences in structure and diaphragm
In terms of structure, the electret mic head is mostly the plate on the top and the diaphragm on the bottom, where the substrate will open holes. This design leads to the electret mic head easy to enter oil and water, the dielectric permittance will change, the capacitance will change, and there will be such as self-starting situation.
In order to avoid oil leakage, the structure design with plate under and diaphragm on top can avoid oil inflow problem, but it is difficult in assembly process and will increase mass production cost.
Microstructure of the mic head
The capacitive silicon wheat, according to professionals, can be designed into the diaphragm on the plate under the structure. At the same time, different from the polymer diaphragm of the electret head, the diaphragm of silicon wheat is silicon based film.
In terms of manufacturing process, the electret microphone is usually assembled manually, but there are some leading companies that use automatic assembly, while the silicon microphone uses MEMS process.
In terms of performance, the electret microphone is the most mature electronic cigarette microphone at present. Stable mass production and low cost are the advantages. At the same time, there are also some shortcomings, such as not oil proof, bad heat dissipation, can not pass SMT, etc.
If you want to pursue better performance, as well as higher production efficiency, the advantages of silicon wheat will gradually highlight, such as waterproof and oil proof, small size, high temperature resistance can be SMT, consistency and stability and so on.
The main problem with silicon wheat is cost, that is, "everything is good, but expensive." The good news is that with the progress of the process, the cost can be equal to that of the electret microphone in the case of mass production applications, according to the manufacturer.
In general, there are two main types of capacitive microphones, electret and silicon mic, which are different in structure, diaphragm material, manufacturing process and performance. In the application of electronic cigarette, electret mic is a mature scheme, while silicon mic is considered to be the future trend.
01










